Green Mineral Shed Felt – Premium Shed Roofing Felt

To install mineral felt you simply lay it over the roof and use roofing tacks to hold it down, the order in which you lay the felt is different depending on the roof type.

Pent: For a pent roof you work from the lower side upwards so that the water runs off the overlaps (100mm), usually towards the back of the building.

Apex: For apex roofs you start at the eaves and work your way up to the ridge of the roof overlapping as you go (100mm), your last piece will go over both sides of the ridge and overlap the pieces on either side.

The best way to find how much felt you need is to take measurements directly from the building. Remember to take into account the overlaps of 100mm when laying each of the strips. Also take into account that the felt will need to be cut to length so it is better to measure how many lengths you will need rather than the Square metre.

Yes, at BillyOh we use this roof covering on a wide range of our buildings including the playhouse ranges. All playhouses are EN71-approved so you can be sure that this covering will be great for your little one’s playhouse.